How to use a professional floor polisher.

Drying the floor

Finally, it is important to completely dry the floor before proceeding with polishing. Make sure there are no damp areas or residual moisture on the surface, otherwise the wax will not adhere properly.

• Clean the floor thoroughly to remove dust and stains;
• Repair any defects with specific products;
• Degrease the floor to remove grease and oil;
• Completely dry the floor.

Using a professional polisher

Before using a professional polisher, it is important that you are familiar with its operation and its parts. In general, a floor polisher consists of a motor, a handle, and a rotating disc to which abrasive pads or brushes are applied.

Steps for using the professional polisher:

• Cleaning the floor: Before starting polishing, it is necessary to thoroughly clean the floor to remove dust, dirt, and debris. Use a damp mop or vacuum cleaner to eliminate any trace of dirt from the floor.
• Preparing the machine: Make sure that the polisher is correctly mounted with the abrasive pad or brush suitable for the type of flooring you are working on. Also adjust the speed of the machine based on the surface being treated.
• Starting polishing: Turn on the machine and position yourself on the edge of the floor. Move slowly along the floor, always keeping the machine in motion. Remember not to exert too much pressure on the machine, but let the weight of the machine do the work.
• Changing the abrasive pad or brush: When you notice that the abrasive pad or brush is losing effectiveness, replace it with a new one. Generally, abrasive pads should be replaced every time you move to a finer grain.
• Cleaning the machine: After completing polishing, turn off the machine and thoroughly clean the rotating disc, abrasive pad or brush used, and external parts of the machine itself.

Remember that polishing the floor requires patience and attention to detail to achieve the best results. Follow these simple steps to properly use your professional polisher and enjoy a shiny floor like new!

Maintenance of the polisher and polished floor

To keep your polisher in excellent condition, it is important to regularly perform maintenance. Here are some tips:

• Clean the power cord after each use to prevent dust or dirt from accumulating.
• Clean the polishing disk after each use to remove any wax or dust residue.
• Periodically remove the brush cover to clean the brushes and remove any debris.

• Regularly check the status of the brushes and replace them if necessary.
• Lubricate the machine's bearings every six months to ensure smooth operation.

In addition, it is important to take care of the newly polished floor. Here are some tips:

• Avoid walking on the newly polished floor until it is completely dry.
• Clean the floor only with products specifically designed for the type of floor you have polished.
• Avoid using overly aggressive detergents that could damage the floor.
• Immediately remove any stains from the floor to prevent them from seeping into the material.

By following these simple tips, you can keep your polishing machine and polished floor in excellent condition for a long time.

Conclusions and helpful advice

After reading this article, we hope you have gained a deeper understanding of how to use a professional floor polishing machine. Here are some helpful tips to keep in mind when using a polisher:

• Make sure you have the right personal protective equipment, such as gloves and protective eyewear.
• Clean the floor thoroughly before starting polishing to remove any debris or dust.
• Start with a less aggressive abrasive disc and gradually move up to more abrasive discs if necessary.
• Always maintain a constant angle between the machine and the floor during polishing to avoid scratches or damage to the floor.
• Do not exert too much pressure on the machine while working; let the weight of the machine do the work for you.
• Make sure to follow the manufacturer's instructions for using your specific professional polishing machine.

Remember, floor polishing takes time and patience. Do not try to do everything at once. Take frequent breaks and regularly check progress to ensure that you are not causing damage to the floor. With these tips, you will be able to achieve professional results in cleaning your floors.

In conclusion, a professional floor polishing machine is an essential tool for maintaining your floors in excellent condition. With the right equipment, proper techniques, and necessary patience, you can achieve amazing results in cleaning your floors. So don't hesitate: choose your professional polisher and start making your floors shine today!